AD 2012-26-11
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Textron | Inc | Airworthiness Directives; Bell Helicopter Textron Inc. Helicopters |
| aircraft | Bell | Helicopter Textron Inc | Airworthiness Directives; Bell Helicopter Textron Inc. Helicopters |
Unsafe Condition
The power cable assembly connector deterioration can cause a short in the connector, potentially leading to a fire in the starter/generator, smoke in the cockpit, reduced visibility, and risk of loss of control of the helicopter.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Replace the power cable assemblies using parts from starter/generator kit P/N CT205-07-94-1, perform a continuity test, and connect wires to the starter generator according to the Accomplishment Instructions in the specified Alert Service Bulletins.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within six months
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Bell Helicopter Textron Inc. Model 205A, 205A-1, and 205B helicopters with starter/generator power cable assemblies, part numbers 205-075-902-017 and 205-075-911-007 installed.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.