AD 2011-13-02
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Aviat | Various | Airworthiness Directives; Costruzioni Aeronautiche Tecnam srl Model P2006T Airplanes |
Unsafe Condition
A loose Seeger ring was found on the nose landing gear hydraulic actuator cap, attributed to a design deficiency of the hydraulic actuator caps. This could lead to uncommanded and improper extension of the nose or main landing gear.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Modify each nose and main landing gear hydraulic actuator by installing security rings, in accordance with Costruzioni Aeronautiche Tecnam Service Bulletin No. SB 036-CS, 1st Edition, Rev 1, dated December 15, 2010.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 50 hours time-in-service after July 22, 2011, or within 60 days after July 22, 2011, whichever occurs first.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Costruzioni Aeronautiche Tecnam srl Model P2006T airplanes, serial numbers 01/US through 046/US, 047/US, and 049/US, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.