AD 2010-25-02
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Aviat | Various | Airworthiness Directives; British Aerospace Regional Aircraft Models Jetstream Series 3101 and Jetstream Model 3201 Airplanes |
Unsafe Condition
Failure of the undercarriage jack mounting shaft assembly can occur, leading to Main Landing Gear (MLG) collapse on the ground or during landing, which could result in damage to the aircraft or injury to occupants.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Establish the number of flight cycles (landings) accumulated since installation of each left and right main landing gear radius rod mounting shaft assembly. Replace the left and right main landing gear radius rod mounting shaft assembly with an airworthy assembly within specified landing limits. Repetitively replace each assembly at intervals not exceeding the defined life limits.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 30 days after January 11, 2011, for establishing flight cycle counts. Replacement actions must be completed within specified landing limits, whichever occurs later.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
British Aerospace Regional Aircraft Models Jetstream Series 3101 and Jetstream Model 3201 airplanes, all serial numbers, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.