AD 2010-13-02
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Fokker | Services B | Airworthiness Directives; Fokker Services B.V. Model F.27 Mark 500 and 600 Airplanes |
| aircraft | Aviat | Various | Airworthiness Directives; Fokker Services B.V. Model F.27 Mark 500 and 600 Airplanes |
Unsafe Condition
An end stop on the main landing gear (MLG) sliding member unscrewed, causing the MLG torque links to move into an overcentre position against the sliding member. This condition could lead to structural damage of the main gear and loss of control during landing roll.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Conduct repetitive inspections for the presence and proper application of lockwiring on the two lockbolts holding the sliding member end stop. Perform repetitive measurements of the extended portion of the MLG sliding member. Install lockwiring as applicable if missing or damaged.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 50 flight hours after the effective date of the AD.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Fokker Services B.V. Model F.27 Mark 500 and 600 airplanes, serial numbers 10452, 10525, 10530, 10531, 10550, 10557, 10559, 10566, 10569, 10589, 10603, 10605, 10606, 10613, 10615, 10623 through 10631 inclusive, 10633, 10637, 10639, 10641, 10642, 10669, and 10672.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.