AD 2009-26-01
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Cirrus | Design Corporation Model SR22 | Airworthiness Directives; Cirrus Design Corporation Model SR22 Airplanes |
Unsafe Condition
Anti-ice fluid distribution lines with improperly installed compression fittings, which could result in anti-ice fluid distribution line separation.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect the compression fittings on the anti-ice fluid distribution lines for proper installation and repair any fittings that were not properly installed.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Before further flight after December 21, 2009 (the effective date of this AD), unless the inspection requirement has already been done.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Cirrus Design Corporation Model SR22 airplanes; serial numbers 3409, 3411 through 3430, 3432 through 3441, 3443 through 3450, 3455 through 3465, 3467, 3468, 3470 through 3472, 3485, 3486, 3488, 3489, 3491 through 3493, 3495 through 3500, 3504, 3505, 3512, 3513, 3517, 3524, 3525, 3528, and 3546, equipped with an anti-ice system approved for flight into known icing.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.