AD 2008-23-02
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Saab | SAAB 2000 | Airworthiness Directives; Saab Model SAAB 2000 Airplanes |
| aircraft | Aviat | Various | Airworthiness Directives; Saab Model SAAB 2000 Airplanes |
Unsafe Condition
One Part Number (P/N) LM-219-92 Centre Bracket from a P/N LM-219-SA28 Aft Engine Mounting assembly was found to be cracked while installed on the aircraft. This reduces the effectiveness of the mounting assembly and could eventually cause it to fail.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect both aft engine mounting assemblies for sharp edges within 1,000 flight hours after the effective date. If sharp edges are found, perform general visual inspections for cracking of the center bracket every 250 flight hours or conduct general visual and penetrant inspections with the bracket off the wing. If no sharp edges are found, re-identify parts lacking a '-1' marking before further flight.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 1,000 flight hours after the effective date
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Saab Model SAAB 2000 airplanes, certificated in any category, serial number 004 through 063.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.