AD 2008-17-10
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Boeing | 707 | Airworthiness Directives; Boeing Model 707 Airplanes, and Model 720 and 720B Series Airplanes |
Unsafe Condition
Reports of cracks found in the wing to body terminal fittings during routine inspections.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Perform detailed inspections and applicable related investigative and corrective actions within 24 months after the effective date. Repeat inspections every 24 months. Repair any cracks or corrosion found before further flight using an approved method.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 24 months after the effective date
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Model 707-100 long body, -200, -100B long body, and -100B short body series airplanes; Model 707-300, -300B, -300C, and -400 series airplanes; and Model 720 and 720B series airplanes, certificated in any category, as identified in Boeing 707 Special Attention Service Bulletin 3524, dated July 18, 2007.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.