AD 2008-06-05
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Airbus SAS | A330-201 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-202 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-203 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-223 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-243 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-301 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-302 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-303 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-321 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-322 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-323 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-341 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-342 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A330-343 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A340-211 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A340-212 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A340-213 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A340-311 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A340-312 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
| aircraft | Airbus SAS | A340-313 | Airworthiness Directives; Airbus Model A330-200, A330-300, A340- 200, and A340-300 Series Airplanes |
Unsafe Condition
Cracks of the transducer body at its attachment lugs of the mode selector valve position transducers on the elevator servo controls could result in partial loss of elevator function and reduced controllability of the airplane.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Revise the airplane flight manual to include procedures for a pre-flight elevator check before each flight. Perform repetitive inspections for cracks of the attachment lugs of the mode selector valve position transducers on the elevator servo controls. Take corrective actions if necessary. For certain airplanes, upgrade the flight control primary computers.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Airbus Model A330-200, A330-300, A340-200, and A340-300 series airplanes.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
The FAA is superseding an existing airworthiness directive (AD), which applies to all Airbus Model A330-200, A330-300, A340-200, and A340-300 series airplanes. That AD currently requires a revision of the airplane flight manual to include procedures for a pre-flight elevator check before each flight, repetitive inspections for cracks of the attachment lugs of the mode selector valve position transducers on the elevator servo controls, and corrective actions if necessary. This new AD retains the existing requirements, reduces the applicability of the existing AD, and adds terminating actions. For certain airplanes, this AD requires upgrading the flight control primary computers. This AD results from a report of cracks of the transducer body at its attachment lugs. We are issuing this AD to ensure proper functioning of the elevator surfaces, and to prevent cracking of the attachment lugs, which could result in partial loss of elevator function and consequent reduced controllability of the airplane.
Document Text
Show stored source text (verify against official source)
[Federal Register Volume 73, Number 49 (Wednesday, March 12, 2008)]
[Rules and Regulations]
[Pages 13093-13096]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: E8-4488]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2007-0229; Directorate Identifier 2007-NM-042-AD;
Amendment 39-15417; AD 2008-06-05]
RIN 2120-AA64
Airworthiness Directives; Airbus Model A330-200, A330-300, A340-
200, and A340-300 Series Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is superseding an existing airworthiness directive
(AD), which applies to all Airbus Model A330-200, A330-300, A340-200,
and A340-300 series airplanes. That AD currently requires a revision of
the airplane flight manual to include procedures for a pre-flight
elevator check before each flight, repetitive inspections for cracks of
the attachment lugs of the mode selector valve position transducers on
the elevator servo controls, and corrective actions if necessary. This
new AD retains the existing requirements, reduces the applicability of
the existing AD, and adds terminating actions. For certain airplanes,
this AD requires upgrading the flight control primary computers. This
AD results from a report of cracks of the transducer body at its
attachment lugs. We are issuing this AD to ensure proper functioning of
the elevator surfaces, and to prevent cracking of the attachment lugs,
which could result in partial loss of elevator function and consequent
reduced controllability of the airplane.
DATES: This AD becomes effective April 16, 2008.
The Director of the Federal Register approved the incorporation by
reference of certain publications listed in the AD as of April 16,
2008.
ADDRESSES: For service information identified in this AD, contact
Airbus, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France.
Examining the AD Docket
You may examine the AD docket on the Internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a>; or in person at the Docket Management Facility
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The AD docket contains this AD, the regulatory evaluation,
any comments received, and other information. The address for the
Docket Office (telephone 800-647-5527) is the Document Management
Facility, U.S. Department of Transportation, Docket Operations, M-30,
West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE.,
Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Tim Backman, Aerospace Engineer,
International Branch, ANM-116, FAA, Transport Airplane Directorate,
1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425)
227-2797; fax (425) 227-1149.
SUPPLEMENTARY INFORMATION:
Discussion
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 to include an AD that supersedes AD 2004-03-24, amendment
39-13468 (69 FR 6549, February 11, 2004). The existing AD applies to
all Airbus Model A330-200, A330-300, A340-200, and A340-300 series
airplanes. That NPRM was published in the Federal Register on November
26, 2007 (72 FR 65897). That NPRM proposed to retain the existing
requirements, reduce the applicability of the existing AD, and add
terminating actions.
New Service Information
Airbus has issued Revision 03 of Airbus Service Bulletins A330-27-
3115 and A340-27-4119, both dated April 22, 2005. In the NPRM, we
referred to Revision 02 dated December 30, 2003, of those service
bulletins as the appropriate sources of service information for
accomplishing certain required actions. Revision 03 of the service
bulletins updates the operator and aircraft effectivity to show the
latest information. No additional work is required by this revision of
the service bulletins. We have changed paragraph (h) of this AD to
refer to Airbus Service Bulletins A330-27-3115 and A340-27-4119, both
Revision 03, both dated April 22, 2005. We have also added paragraph
(h)(3) to the AD to give credit to operators that have done the actions
previously in accordance with Revision 02 of those service bulletins.
Comments
We provided the public the opportunity to participate in the
development of this AD. We have considered the comment that has been
received on the NPRM.
Request To Extend Compliance Time for the Modification
Air Transport Association (ATA) and one of its members, Northwest
Airlines (NWA), state that the terminating action specified in the
proposed AD should be mandated at a maximum of 24 months after the
effective date for coordination with the aircraft C-check intervals.
NWA adds that the repetitive tests of the elevator servo-loops will
ensure continued safe operation until terminating action is
accomplished.
We do not agree with the request from ATA and NWA to extend the
compliance time. In developing an appropriate compliance time for this
action, we considered the urgency associated with the subject unsafe
condition, the availability of required parts, and the practical aspect
of accomplishing the required modification within a period of time that
corresponds to the normal scheduled maintenance for most affected
operators. In light of these items, we have determined that a 17-month
compliance time is appropriate. However, according to the provisions of
paragraph (p) of the AD, we might approve requests to adjust the
compliance time if the request includes data that justify that the new
compliance time would provide an acceptable level of safety.
Conclusion
We have carefully reviewed the available data, including the
comment that has been received, and determined that air safety and the
public interest require adopting the AD with the changes described
previously. We have determined that these changes will neither increase
the economic burden on any operator nor increase the scope of the AD.
Costs of Compliance
The following table provides the estimated costs for U.S. operators
of the affected Model A330-200 and A330-300 series airplanes to comply
with this AD.
[[Page 13094]]
Estimated Costs
----------------------------------------------------------------------------------------------------------------
Number of
Work Average U.S.-
Action hours labor rate Cost per airplane registered Fleet cost
per hour airplanes
----------------------------------------------------------------------------------------------------------------
AFM revision (required by AD 1 $80 $80.............. 29 $2,320.
2004-03-24).
Inspection (required by AD 4 80 $320, per 29 $9,280, per inspection
2004-03-24). inspection cycle. cycle.
Inspection (new action)....... 1 80 $80.............. 29 $2,320.
----------------------------------------------------------------------------------------------------------------
Currently, there are no affected Model A340-200 and A340-300 series
airplanes on the U.S. Register. However, if an affected airplane is
imported and placed on the U.S. Register in the future, the upgrade of
the flight control primary computers (FCPCs) would take about 2 work
hours, at an average labor rate of $80 per work hour. The manufacturer
states that it would supply required parts to the operators at no cost.
Based on these figures, we estimate the cost of this AD for Model A340-
200 and A340-300 series airplanes to be $160 per airplane.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, Section 106, describes the
authority of the FAA Administrator. Subtitle VII, Aviation Programs,
describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701, ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We have determined that this AD will not have federalism
implications under Executive Order 13132. This AD will not have a
substantial direct effect on the States, on the relationship between
the national government and the States, or on the distribution of power
and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866;
(2) Is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979); and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to
comply with this AD and placed it in the AD docket. See the ADDRESSES
section for a location to examine the regulatory evaluation.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
0
Accordingly, under the authority delegated to me by the Administrator,
the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The Federal Aviation Administration (FAA) amends Sec. 39.13 by
removing amendment 39-13468 (69 FR 6549, February 11, 2004) and by
adding the following new airworthiness directive (AD):
2008-06-05 Airbus: Amendment 39-15417. Docket No. FAA-2007-0229;
Directorate Identifier 2007-NM-042-AD.
Effective Date
(a) This AD becomes effective April 16, 2008.
Affected ADs
(b) This AD supersedes AD 2004-03-24.
Applicability
(c) This AD applies to the airplanes identified in Table 1 of
this AD, certificated in any category.
Table 1.--Applicability
----------------------------------------------------------------------------------------------------------------
Excluding those airplanes on
Airbus model-- which any of the following-- Has been installed--
----------------------------------------------------------------------------------------------------------------
A330-200, A330-300, A340-200, and A340- Airbus Modification 50394, In production.
300 series airplanes. 52195, 53969, or 54833.
Airbus Service Bulletin A330-27- In service.
3128, dated May 3, 2005.
Airbus Service Bulletin A340-27- In service.
4129, dated May 3, 2005.
Airbus Service Bulletin A330-27- In service.
3136, Revision 01, dated July
19, 2006.
Airbus Service Bulletin A340-27- In service.
4135, dated January 12, 2006.
Goodrich Actuation Systems In service.
Service Bulletin SC4800-27-16,
Revision 3, dated May 19, 2006.
----------------------------------------------------------------------------------------------------------------
Unsafe Condition
(d) This AD results from a report of cracks of the transducer
body at its attachment lugs. We are issuing this AD to ensure proper
functioning of the elevator surfaces, and to prevent cracking of the
attachment lugs, which could result in partial loss of elevator
function and consequent reduced controllability of the airplane.
Compliance
(e) You are responsible for having the actions required by this
AD performed within the compliance times specified, unless the
actions have already been done.
[[Page 13095]]
Requirements of AD 2004-03-24
Airplane Flight Manual (AFM) Revision
(f) Within 30 days after February 26, 2004 (the effective date
of AD 2004-03-24), revise the Limitations section of the AFM to
include a pre-flight elevator check, by including the following
language. This may be done by inserting a copy of this AD into the
applicable AFM. Thereafter perform the pre-flight check before every
flight in accordance with the procedure.
Prior or During Taxi:
``FLIGHT CONTROLS--CHECK
1. AT A CONVENIENT STAGE, PRIOR TO OR DURING TAXI, AND BEFORE
ARMING THE AUTOBRAKE, THE PF SILENTLY APPLIES FULL LONGITUDINAL AND
LATERAL SIDESTICK DEFLECTION. ON THE F/CTL PAGE, THE PNF CHECKS FULL
TRAVEL OF ALL ELEVATORS AND ALL AILERONS, AND THE CORRECT DEFLECTION
AND RETRACTION OF ALL SPOILERS. THE PNF CALLS OUT ``FULL UP,''
``FULL DOWN,'' ``NEUTRAL,'' ``FULL LEFT,'' ``FULL RIGHT,''
``NEUTRAL,'' AS EACH FULL TRAVEL/NEUTRAL POSITION IS REACHED. THE PF
SILENTLY CHECKS THAT THE PNF CALLS ARE IN ACCORDANCE WITH THE
SIDESTICK ORDER.
NOTE: IN ORDER TO REACH FULL TRAVEL, FULL SIDESTICK MUST BE HELD
FOR A SUFFICIENT PERIOD OF TIME.
2. THE PF PRESSES THE PEDAL DISC PUSHBUTTON ON THE NOSEWHEEL
TILLER, AND SILENTLY APPLIES FULL LEFT RUDDER, FULL RIGHT RUDDER,
AND NEUTRAL. THE PNF CALLS OUT ``FULL LEFT,'' ``FULL RIGHT,''
``NEUTRAL,'' AS EACH FULL TRAVEL/NEUTRAL POSITION IS REACHED.
3. THE PNF APPLIES FULL LONGITUDINAL AND LATERAL SIDESTICK
DEFLECTION, AND SILENTLY CHECKS FULL TRAVEL AND CORRECT SENSE OF ALL
ELEVATORS AND ALL AILERONS, AND CORRECT DEFLECTION AND RETRACTION OF
ALL SPOILERS, ON THE ECAM F/CTL PAGE.''
Note 1: Full and complete elevator travel (position commanded)
can be verified on the ECAM Flight Control Page. A determination of
``correct sense'' should include verification that there is complete
and full motion of the sidesticks without binding.
(g) If any pre-flight check required by paragraph (f) of this AD
reveals improper function of the elevator: Before further flight,
perform the inspections required by paragraph (h) of this AD.
Inspections
(h) At the applicable time specified in paragraph (h)(1) or
(h)(2) of this AD, except as required by paragraph (g) of this AD:
Perform a dye penetrant inspection of the attachment lugs of the
mode selector valve position transducers on each elevator servo
control installed at damping positions 3CS1 and 3CS2. Do the
inspection in accordance with the Accomplishment Instructions of
Airbus Service Bulletin A330-27-3115 or A340-27-4119, both Revision
03, both including Appendix 01, both dated April 22, 2005, as
applicable (in paragraphs (h) through (k) of this AD, referred to as
``the service bulletin''). An inspection that is done before
February 26, 2004, is acceptable for compliance with the initial
inspection requirement of this paragraph, if the inspection is done
in accordance with any of the following Airbus all operators telexes
(AOTs): AOT A330-27A3115 or A340-27A4119, dated September 11, 2003,
or Revision 01 of each AOT dated September 25, 2003; as applicable.
Repeat the inspection thereafter at intervals not to exceed 350
flight cycles, until the applicable actions required by paragraphs
(m) and (n) of this AD have been done.
(1) If the age of the servo control from the date of its first
installation on the airplane can be positively determined: Do the
inspection before the accumulation of 1,000 total flight cycles on
the elevator servo control, or within 350 flight cycles on the servo
control after February 26, 2004, whichever occurs later.
(2) If the age of the servo control from the date of its first
installation on the airplane cannot be positively determined, do the
inspection within 350 flight cycles on the servo control after
February 26, 2004.
(3) Actions done before the effective date of this AD in
accordance with Airbus Service Bulletin A330-27A3115 or A340-
27A4119, both Revision 02, both including Appendix 01, both dated
December 30, 2003, are acceptable for compliance with the
corresponding requirements of this AD.
Note 2: The service bulletin refers to Goodrich Actuation
Systems Inspection Service Bulletin SC4800-27-13 as an additional
source of service information for the inspection.
Corrective Actions
(i) If any crack is found during any inspection required by
paragraph (h) of this AD: Before further flight, replace either the
transducer or servo control with a new part, in accordance with the
service bulletin.
Reporting Requirement
(j) If any crack is found during any inspection required by
paragraph (h) of this AD: Submit a report in accordance with the
service bulletin at the applicable time(s) specified in paragraphs
(j)(1) and (j)(2) of this AD: Submit reports to Airbus Customer
Services, Engineering and Technical Support, Attention: J. Laurent,
SEE53, fax +33/(0)5.61.93.44.25, Sita Code TLSBQ7X. Under the
provisions of the Paperwork Reduction Act of 1980 (44 U.S.C. 3501 et
seq.), the Office of Management and Budget (OMB) has approved the
information collection requirements contained in this AD and has
assigned OMB Control Number 2120-0056.
(1) For an initial inspection done before February 26, 2004:
Submit the report within 30 days after February 26, 2004.
(2) For an inspection done after February 26, 2004: Submit the
report within 30 days after the inspection.
Parts Installation
(k) As of February 26, 2004, no person may install the following
part on any airplane: a transducer, or a transducer fitted on an
elevator servo control, in the operator's inventory before September
25, 2003, unless that transducer has been inspected in accordance
with the service bulletin and is crack free.
New Requirements of This AD
Upgrade Flight Control Primary Computers (FCPCs)
(l) For Model A340-200 and -300 series airplanes: Within 2
months after the effective date of this AD, upgrade the three FCPCs
in accordance with the Accomplishment Instructions of Airbus Service
Bulletin A340-27-4131, dated February 21, 2005.
Note 3: Airbus Service Bulletin A340-27-4131 refers to Airbus
Vendor Service Bulletins LA2K0-27-017 and LA2K1-27-009, both dated
January 25, 2005, as additional sources of service information for
upgrading the FCPCs.
Terminating Actions
(m) Within 17 months after the effective date of this AD, do the
actions specified in Table 2 of this AD.
Table 2.--Terminating Actions
----------------------------------------------------------------------------------------------------------------
In accordance with
the Accomplishment
Instructions of In accordance
Inspect-- Airbus Service And if-- Then-- with--
Bulletin--
----------------------------------------------------------------------------------------------------------------
(1) The elevator servo control A330-27-3128, P/N SC4800-7A or - Modify the four The Accomplishment
to determine whether part dated May 3, 2005 9 is found elevator servo Instructions of
number (P/N) SC4800-7A or -9 is (for Model A330- installed. controls. the applicable
installed. 200 and -300 Airbus Service
series Bulletin.
airplanes); or
A340-27-4129,
dated May 3, 2005
(for Model A340-
200 and -300
series
airplanes); as
applicable.
[[Page 13096]]
(2) The elevator servo controls, None.............. S/N 2324 or below Replace the mode Paragraphs 3.A.(2)
P/N SC4800-10 and SC4800-11 to is found selector valve and 3.B.(2) of
determine the serial number (S/ installed. position the
N) installed. transducer (MVT) Accomplishment
of the elevator Instructions of
servo controls Goodrich
with a new MVT. Actuation Systems
Service Bulletin
SC4800-27-16,
Revision 3, dated
May 19, 2006.
----------------------------------------------------------------------------------------------------------------
Note 4: Airbus Service Bulletins A330-27-3128 and A340-27-4129
refer to Goodrich Actuation Systems Service Bulletin SC4800-27-16,
Revision 3, dated May 19, 2006, as an additional source of service
information for accomplishing the modification of the four elevator
servo controls.
(n) Prior to or concurrently with the replacement, if required,
specified in paragraph (m)(2) of this AD, replace the eye-end
equipped with a self-lubricated bearing with a new eye-end equipped
with a roller bearing, grease the new eye-end, and reidentify the
servo control, in accordance with paragraph 2.A. of the
Accomplishment Instructions of TRW Service Bulletin SC4800-27-34-09,
Revision 1, dated November 9, 2001.
(o) Accomplishing all of the applicable actions required by
paragraphs (m) and (n) of this AD constitutes terminating action for
paragraphs (f) through (k) of this AD.
Alternative Methods of Compliance (AMOCs)
(p)(1) The Manager, International Branch, ANM-116, Transport
Airplane Directorate, FAA, has the authority to approve AMOCs for
this AD, if requested in accordance with the procedures found in 14
CFR 39.19.
(2) To request a different method of compliance or a different
compliance time for this AD, follow the procedures in 14 CFR 39.19.
Before using any approved AMOC on any airplane to which the AMOC
applies, notify your appropriate principal inspector (PI) in the FAA
Flight Standards District Office (FSDO), or lacking a PI, your local
FSDO.
Related Information
(q) European Aviation Safety Agency airworthiness directive
2007-0011, dated January 9, 2007, also addresses the subject of this
AD.
Material Incorporated by Reference
(r) You must use the applicable service information contained in
Table 3 of this AD to perform the actions that are required by this
AD, unless the AD specifies otherwise.
Table 3.--Material Incorporated by Reference
----------------------------------------------------------------------------------------------------------------
Service Bulletin Revision level Date
----------------------------------------------------------------------------------------------------------------
Airbus Service Bulletin A330-27-3115, 03................................. April 22, 2005.
including Appendix 01.
Airbus Service Bulletin A330-27-3128.. Original........................... May 3, 2005.
Airbus Service Bulletin A340-27-4119, 03................................. April 22, 2005.
including Appendix 01.
Airbus Service Bulletin A340-27-4129.. Original........................... May 3, 2005.
Airbus Service Bulletin A340-27-4131.. Original........................... February 21, 2005.
Goodrich Actuation Systems Service 3.................................. May 19, 2006.
Bulletin SC4800-27-16.
TRW Service Bulletin SC4800-27-34-09.. 1.................................. November 9, 2001.
----------------------------------------------------------------------------------------------------------------
Goodrich Actuation Systems Service Bulletin SC4800-27-16,
Revision 3, contains the following effective pages:
------------------------------------------------------------------------
Revision level
Page No. shown on page Date shown on page
------------------------------------------------------------------------
1, 6, 8....................... Original......... May 9, 2005.
2-5, 7........................ 3................ May 19, 2006.
------------------------------------------------------------------------
(1) The Director of the Federal Register approved the
incorporation by reference of these documents in accordance with 5
U.S.C. 552(a) and 1 CFR part 51.
(2) For service information identified in this AD, contact
Airbus, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France.
(3) You may review copies at the FAA, Transport Airplane
Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the
National Archives and Records Administration (NARA). For information
on the availability of this material at NARA, call 202-741-6030, or
go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">http://www.archives.gov/federal-register/cfr/ibr-locations.html</a>.
Issued in Renton, Washington, on February 28, 2008.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. E8-4488 Filed 3-11-08; 8:45 am]
BILLING CODE 4910-13-P
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.