AD 2007-23-10
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Boeing | 737-600 | Airworthiness Directives; Boeing Model 737-600, -700, -700C, -800 and -900 Series Airplanes |
Unsafe Condition
Missing or insufficient fillet sealant around the receptacles installed in the wheel wells of the main landing gear (MLG), which could lead to corrosion damage and insufficient electrical bonding between the connectors and the disconnect bracket, resulting in loss of shielding for wire bundles from lightning, EMI, and HIRF.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Perform a detailed inspection to determine if there is sufficient fillet sealant at the inboard and outboard sides of the receptacles in the MLG wheel wells. Take investigative/corrective actions if necessary, including replacement of connectors if corrosion exceeds acceptable limits.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 24 months after the effective date of this AD.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Boeing Model 737-600, -700, -700C, -800, and -900 series airplanes, certificated in any category, as identified in Boeing Special Attention Service Bulletin 737-24-1169, Revision 1, dated August 6, 2007.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.