AD 2007-17-07
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Bombardier | Various | Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes |
| aircraft | Aviat | Various | Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes |
Unsafe Condition
The Bombardier CL-600-2B19 airplanes have had a history of flap failures at various positions, which may result in a significant increase in required landing distances and higher fuel consumption than planned during a diversion.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect and clean flexible shafts, inspect actuator connector sealant bead for damage or delamination, repair damaged sealant, perform low temperature torque checks on actuators, install serviceable actuators if necessary, install metallic seals in flexible drive-shafts, inspect mating surfaces on flexible drive-shafts for damage, clean sealing washer and mating surfaces, and apply sealant if damage is found.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Before further flight
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.