AD 2007-16-11
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Fokker | F27 Mark 050 | Airworthiness Directives; Fokker Model F27 Mark 050 Airplanes Equipped With Dowty Type R.352 or R.410 Series Propellers |
Unsafe Condition
Use of 3M 1300L adhesive to attach propeller blade de-icer assembly overshoes (boots) may result in debonding and separation of the boots during flight, leading to reduced structural integrity and potential injury to passengers and crew.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Check maintenance records to determine if 3M 1300L adhesive was used to attach the boots. Perform repetitive inspections of affected boots. Replace boots attached with defective adhesive.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Before further flight
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Fokker Model F27 Mark 050 airplanes equipped with Dowty Type R.352 or R.410 series propellers.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.