AD 2007-13-12
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Aviat | Various | Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A. Model P-180 Airplanes |
Unsafe Condition
Further failure of the forward support of the Main Wing Outboard Flap (MWOF), caused by corrosion, which may cause surface twisting during deployment at landing.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Replace the outboard flap track forward bushing and the outboard flap track forward support using Piaggio Aero Industries S.p.A. Mandatory Service Bulletin (SB) No. 80-0210, Rev 4. Visually inspect the outboard flap track forward support at intervals not to exceed 1,500 hours TIS for corrosion or wear damage. Repair any identified corrosion or wear damage before further flight.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 200 hours time-in-service (TIS) after August 3, 2007, or within 60 days after August 3, 2007, whichever occurs first.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Piaggio Aero Industries S.p.A. Model P-180 airplanes, serial numbers 1002, 1004 through 1107, 1109, and 1110, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.