AD 2005-11-08
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | GROB-WERKE | Model G120A | Airworthiness Directives; GROB-WERKE Model G120A Airplanes |
Unsafe Condition
Front and rear main landing gear spherical bearings (P/N S20) are susceptible to damage when exposed to high axial loads, which could result in failure of the landing gear bearing. This failure could lead to loss of control on landing.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Replace any part number (P/N) S20 main landing gear front and rear spherical bearings with improved spherical bearings (P/N SSRC 20 C2). Do not install any P/N S20 main landing gear front and rear spherical bearings after July 18, 2005.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within the next 100 hours time-in-service (TIS) after July 18, 2005 (the effective date of this AD), unless already done.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
GROB-WERKE Model G120A airplanes, all serial numbers, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.