AD 2005-05-11
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Dornier | Model 328-300 Series | Airworthiness Directives; Dornier Model 328-300 Series Airplanes |
Unsafe Condition
Reports of cracking and breakage of the heat pack rotor assemblies, leading to loss of braking capability and potential runway overrun during take-off or landing.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Perform a detailed inspection for discrepancies of the heat pack rotor assembly and rotor drive clips of the brake unit of the main landing gear (MLG). Replace the heat pack rotor assembly if any discrepancy is found. Repeat inspections at intervals not exceeding the next brake installation or 24 months, whichever is first.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 24 months after the effective date of the AD or at the next brake installation, whichever is earlier.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Dornier Model 328-300 series airplanes equipped with a Dunlop brake unit having part number AHA2227-3 or -4.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.