AD 2000-09-13
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | British | 3201 | Airworthiness Directives; British Aerospace Jetstream Model 3201 Airplanes |
Unsafe Condition
Damage to the insulation of the wiring within the fuel tanks of the fuel quantity indication system, which could result in a malfunction in the cockpit indicators and/or electrical sparking inside the fuel tank with consequent fire or explosion.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect the fuel quantity indication system for damage to the insulation of the wiring within the fuel tanks. Damage is defined as corrosion (indicated by a dark stain), cuts, or nicks. Replace or repair any damaged wiring prior to further flight after the inspection.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within the next 200 hours time-in-service (TIS) or 60 calendar days, whichever occurs first.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
British Aerospace Jetstream Model 3201 airplanes, all serial numbers, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
This amendment adopts a new airworthiness directive (AD) that applies to British Aerospace Jetstream Model 3201 airplanes. This AD requires you to inspect the fuel quantity indication system for damage to the insulation of the wiring within the fuel tanks, and repair or replace damaged wiring. Damage is defined as corrosion (indicated by a dark stain), cuts, or nicks. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for the United Kingdom. The actions specified by this AD are intended to detect damage to the insulation of the wiring within the fuel tanks of the fuel quantity indication system, which could result in a malfunction in the cockpit indicators and/or electrical sparking inside the fuel tank with consequent fire or explosion.
Document Text
Show stored source text (verify against official source)
[Federal Register Volume 65, Number 94 (Monday, May 15, 2000)]
[Rules and Regulations]
[Pages 30863-30865]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 00-11718]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 99-CE-72-AD; Amendment 39-11722; AD 2000-09-13]
RIN 2120-AA64
Airworthiness Directives; British Aerospace Jetstream Model 3201
Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This amendment adopts a new airworthiness directive (AD) that
applies to British Aerospace Jetstream Model 3201 airplanes. This AD
requires you to inspect the fuel quantity indication system for damage
to the insulation of the wiring within the fuel tanks, and repair or
replace damaged wiring. Damage is defined as corrosion (indicated by a
dark stain), cuts, or nicks. This AD is the result of mandatory
continuing airworthiness information (MCAI) issued by the airworthiness
authority for the United Kingdom. The actions specified by this AD are
intended to detect damage to the insulation of the wiring within the
fuel tanks of the fuel quantity indication system, which could result
in a malfunction in the cockpit indicators and/or electrical sparking
inside the fuel tank with consequent fire or explosion.
DATES: This AD becomes effective on June 23, 2000.
The Director of the Federal Register approved the incorporation by
reference of certain publications listed in the regulation as of June
23, 2000.
ADDRESSES: You may get the service information referenced in this AD
from British Aerospace Regional Aircraft, Prestwick International
Airport, Ayrshire, KA9 2RW, Scotland;
[[Page 30864]]
telephone: (01292) 672345; facsimile: (01292) 671625. You may examine
this information at Federal Aviation Administration (FAA), Central
Region, Office of the Regional Counsel, Attention: Rules Docket No. 99-
CE-72-AD, 901 Locust, Room 506, Kansas City, Missouri 64106; or at the
Office of the Federal Register, 800 North Capitol Street, NW, suite
700, Washington, DC.
FOR FURTHER INFORMATION CONTACT: Mr. S.M. Nagarajan, Aerospace
Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 506, Kansas
City, Missouri 64106; telephone: (816) 329-4145; facsimile: (816) 329-
3091.
SUPPLEMENTARY INFORMATION:
Events Leading to the Issuance of This AD
What caused this AD? This AD is the result of damage to the
insulation of the wiring within the wing fuel tanks of the fuel
quantity indication system on two British Aerospace Jetstream Model
3201 airplanes. Further investigation shows that the damage to the
insulation occurred during factory installation.
Has FAA taken any action to this point? We issued a proposal to
amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to
include an AD that would apply to all British Aerospace Jetstream Model
3201 airplanes. This proposal was published in the Federal Register as
a notice of proposed rulemaking (NPRM) on January 6, 2000 (65 FR 729).
The NPRM proposed to require you to inspect the fuel quantity
indication system for damage to the insulation of the wiring within the
fuel tanks, with necessary repair or replacement of damaged wiring.
Damage is defined as corrosion (indicated by a dark stain), cuts, or
nicks.
The NPRM would require you to accomplish the proposed actions in
accordance with British Aerospace Jetstream Alert Service Bulletin 28-
A-JA990841, Original Issue: September 8, 1999; or British Aerospace
Jetstream Alert Service Bulletin 28-A-JA990841, Original Issue:
September 8, 1999; Revision No. 1: November 12, 1999.
Was the public invited to comment? The FAA offered interested
persons the opportunity to participate in the making of this amendment.
We have given due consideration to the one comment received.
Comment Disposition
What is the Commenter's Concern? The commenter requests that FAA
extend the compliance time to 3 months instead of 100 hours time-in-
service (TIS) or 60 calendar days, whichever occurs first. The
commenter states that high usage Jetstream Model 3201 airplanes can
accumulate 100 hours TIS in well under 30 days. The commenter's concern
is that entities with large fleets of the affected airplanes may not be
able to accomplish the proposed AD if not given at least a 30-day
period.
What is FAA's Response to the Concern? We concur with extending the
compliance time, but not to 3 months. We will maintain the 60 calendar
days, and will increase the 100-hour TIS time to 200 hours TIS. This
will give the high usage airplanes more than 30 days to accomplish the
action and the low usage airplanes 60 days. British Aerospace issued
the service information in September 1999 and specified compliance in
October 1999. The change in the compliance time coincides with the
service bulletin.
The FAA's Determination
What is FAA's final determination on this issue? After reviewing
all available information related to the subject presented above, we
have determined that air safety and the public interest require the
adoption of the rule as proposed except for the change in the
compliance time and minor editorial corrections.
How do these changes and corrections affect the AD? We have
determined that the change and minor corrections will not change the
meaning of the AD and will not add any additional burden upon the
public than was already proposed.
Compliance Time of This AD
What is the compliance time of this AD? The compliance time of this
AD is within the next 200 hours TIS or 60 calendar days, whichever
occurs first.
Why is the compliance in both calendar time and hours TIS? The
compliance time of this AD is presented in both calendar time and hours
TIS. Damage to the insulation of the wires in the fuel quantity
indicator system could result in corrosion in the core conductor.
Corrosion damage can then develop regardless of whether the airplane is
in flight, and may not develop until a later time. Therefore, in order
to assure that any damage does not go undetected, we are utilizing a
compliance time of both hours TIS and calendar time (the prevalent one
being that which occurs first).
Cost Impact
How many airplanes does this AD impact? The FAA estimates that this
AD affects 115 airplanes in the U.S. registry.
What is the cost impact of this action on owners/operators of the
affected airplanes? We estimate that it would take approximately 60
workhours per airplane to accomplish this action, at an average labor
rate of $60 an hour. Based on these figures, FAA estimates the cost
impact of this AD on U.S. operators at $414,000, or $3,600 per
airplane.
Regulatory Impact
The regulations adopted herein will not have a substantial direct
effect on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government. Therefore, it
is determined that this final rule does not have federalism
implications under Executive Order 13132.
The FAA has determined that this action:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866;
(2) Is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979); and
(3) will not have a significant economic impact on a substantial
number of small entities under the criteria of the Regulatory
Flexibility Act.
A copy of the final evaluation prepared for this action is contained in
the Rules. We have placed a copy of the final regulatory evaluation
prepared for this action in the Rules Docket. You may obtain a copy of
it at the Rules Docket at the location provided under the caption
ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the Federal Aviation Administration amends part 39 of
the Federal Aviation Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. FAA amends Section 39.13 by adding a new airworthiness directive
(AD) to read as follows:
2000-09-13 British Aerospace: Amendment 39-11722; Docket No. 99-CE-
72-AD.
(a) What airplanes are affected by this AD? This AD applies to
Jetstream Model 3201 airplanes, all serial numbers, certificated in
any category.
(b) Who must comply with this AD? Anyone who wishes to operate
any of the
[[Page 30865]]
above airplanes on the U.S. Register must comply with this AD.
(c) What problem and safety aspects does this AD address? The
actions specified by this AD are intended to detect damage to the
insulation of the wiring within the fuel tanks of the fuel quantity
indication system. If not detected and corrected, this damage could
result in a malfunction in the cockpit indicators and/or electrical
sparking inside the fuel tank with consequent fire or explosion.
(d) What actions must I accomplish to address this problem? To
address this problem, you must accomplish the following:
------------------------------------------------------------------------
Action Compliance time Procedures
------------------------------------------------------------------------
Inspect the fuel quantity At whichever of the Accomplish these
indication system for following that actions in
damage to the insulation of occurs first: accordance with one
the wiring within the fuel --Within the next of the following:
tanks. Damage is defined as 200 hours time-in- --British Aerospace
corrosion (indicated by a service (TIS) after Jetstream Alert
dark stain), cuts, or nicks. June 23, 2000 (the Service Bulletin 28-
effective date of A-JA990841,
this AD); or. Original Issue:
--On or before September 8, 1999;
August 21, 2000 (60 or
days after the --British Aerospace
effective date of Jetstream Alert
this AD). Service Bulletin 28-
A-JA990841,
Original Issue:
September 8, 1999;
Revision No. 1:
November 12, 1999.
Replace or repair any Prior to further Accomplish in
damaged wiring. flight after the accordance with one
inspection required of the previously
by this AD. referenced service
bulletins.
------------------------------------------------------------------------
(e) Can I comply with this AD in any other way?
(1) You may use an alternative method of compliance or adjust
the compliance time if:
(i) Your alternative method of compliance provides an equivalent
level of safety; and
(ii) The Manager, Small Airplane Directorate, approves your
alternative. Submit your request through an FAA Principal
Maintenance Inspector, who may add comments and then send it to the
Manager.
(2) This AD applies to any airplane referenced in paragraph (a)
of this AD, regardless of whether it has been modified, altered, or
repaired in the area subject to the requirements of this AD. For
those airplanes that have been modified, altered, or repaired so
that the performance of the requirements of this AD is affected, the
owner/operator must request approval for an alternative method of
compliance in accordance with paragraph (e)(1) of this AD. The
request should include an assessment of the effect of the
modification, alteration, or repair on the unsafe condition
addressed by this AD; and, if you have not eliminated the unsafe
condition, specific actions you propose to address it.
(f) Where can I get information about any already-approved
alternative methods of compliance? Contact the Small Airplane
Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106;
telephone: (816) 329-4140; facsimile: (816) 329-4090.
(g) What if I need to fly the airplane to another location to
comply with this AD? The FAA can issue a special flight permit under
Secs. 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR
21.197 and 21.199) to operate your airplane to a location where you
can accomplish the requirements of this AD.
(h) Who should I contact if I have questions regarding the
service information? Direct all questions or technical information
related to this AD to British Aerospace Regional Aircraft, Prestwick
International Airport, Ayrshire, KA9 2RW, Scotland; telephone:
(01292) 672345; facsimile: (01292) 671625.
(i) Are any service bulletins incorporated into this AD by
reference? You must accomplish the actions required by this AD in
accordance with British Aerospace Jetstream Alert Service Bulletin
28-A-JA990841, Original Issue: September 8, 1999; or British
Aerospace Jetstream Alert Service Bulletin 28-A-JA990841, Original
Issue: September 8, 1999; Revision No. 1: November 12, 1999. The
Director of the Federal Register approved this incorporation by
reference under 5 U.S.C. 552(a) and 1 CFR part 51. You can get
copies from British Aerospace Regional Aircraft, Prestwick
International Airport, Ayrshire, KA9 2RW, Scotland. You can look at
copies at FAA, Central Region, Office of the Regional Counsel, 901
Locust, Room 506, Kansas City, Missouri, or at the Office of the
Federal Register, 800 North Capitol Street, NW, suite 700,
Washington, DC.
(j) Has another airworthiness authority addressed this action?
The subject of this AD is addressed in British AD 003-09-99, dated
September 13, 1999.
(k) When does this amendment become effective? This amendment
becomes effective on June 23, 2000.
Issued in Kansas City, Missouri, on May 4, 2000.
Michael Gallagher,
Manager, Small Airplane Directorate, Aircraft Certification Service.
[FR Doc. 00-11718 Filed 5-12-00; 8:45 am]
BILLING CODE 4910-13-P
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.